High Strength Adhesive


Price : INR 650.00 / 5 Kg




Features :

  • Ready to use, only water to be added.
  • High strength with improved adhesion.
  • No Slump & Non Sagging
  • Good workability & Better Coverage.
  • Suitable for internal application of Vitrified & Ceramic tiles On wall & floor, any type of exterior flooring.


Direction for Use

  • Surface Preparation : The surface to be tiled must be firm and clean, free from dust, waxes, paint and other contamination.
  • Mixing : Mix with clean water using 5-6 liters per 20 Kg. bag to a thick creamy consistency. Adjust mix to suit users preference. Mix sufficient to last 30-60 minutes. Allow to stand for 5-10 minutes and stir again before use.
  • Application : Apply with a notched trowel. The final bed thickness must not be less than 2 mm for wall and 3 mm for floors, to accommodate movement. Spread about 1 meter at a time. Tiles must be set in place while the adhesive is still wet on the surface. Press tiles firmly on to the adhesive using a slight sliding motion.
  • Coverage : Approx 50 -55 sq.ft/ Bag at 3 mm bed thickness
  • Grouting : Grout after adhesive has set for 24 hours.
  • Safety Precautions : Non-toxic, but contains cement which contains silica. Wear gloves and appropriate respirator.
  • Shelf Life : 12 month when stored in normal dry condition.

Specifications

Appearance Cementitious Powder
Mixing ratio 5 to 6 Itr. Water per bag
Open Time 15 to 20 minutes
Pot Life Approx 2 Hours
Setting time 24 Hours
Tensile Adhesion 1.75 Kn (14 day -dry Condition)
Shear Adhesion 10.00 kn (14 day -dry Condition)
Compression 10.00 N/mm2 (28 day)
Strength Flexural Strength 5.00 N/mm2(28 day)
Net Wt, 20 Kgs.