Latest Products http://www.hypolchem.com Latest Products Sun, 08 Dec 2019 00:57:15 +0530 en-us http://www.hypolchem.com Integral Cement Waterproofing Compound http://www.hypolchem.com/integral-cement-waterproofing-compound.htm http://www.hypolchem.com/integral-cement-waterproofing-compound.htm Mon, 05 Aug 2019 00:00:00 +0530 Joint & Crack Fillers http://www.hypolchem.com/joint-crack-fillers.htm http://www.hypolchem.com/joint-crack-fillers.htm Mon, 05 Aug 2019 00:00:00 +0530 Diwall Care Wall Putty http://www.hypolchem.com/diwall-care-wall-putty.htm http://www.hypolchem.com/diwall-care-wall-putty.htm Mon, 05 Aug 2019 00:00:00 +0530 Fixcera is a highly saturated and stabilised system of organic liniar copolymers. When the dilute solution of Fixcera is sprayed on glaze coated surface it creats a micro thick flexible film on porous glaze coated surface, which assist in printing process by two ways. First it binds pigment particle with base surface, secondly it prevents deep penitration and spreading of pigment paste (Fluid), Thus giving a sharp and bright printing impression with economy. Double and Heavy Duty Concrete Superplasticizer http://www.hypolchem.com/double-and-heavy-duty-concrete-superplasticizer.htm http://www.hypolchem.com/double-and-heavy-duty-concrete-superplasticizer.htm Mon, 05 Aug 2019 00:00:00 +0530 HYPOSIZER is a water reducing set retarding type of plasticising admixture for cement mortar/concrete as per IS : 9103-1999.Chemically it consist modified anionic lignosulfonate which is free from chloride and safe to handle. It improves the durability of plaster/concrete by promoting dispersion of fine cement particle in the mortar mix with reduced water/cement ratio.Use : It is most ideal for all type of plastering and mass concreting work carried out in hot climate. Ready mix concrete plant. Large volume RCC / PCC like Roads & Deck. Advantage Improve workability with low water/cement ratio. Reduces rebound loss during plaster. Mortar mix can be use for longer period. Due to retarding & humidity retention property it minimises formation of fine hair cracks on the plastered surface. Dosage : 100-200 ml of HYPOSIZER in a pre decided quantity of water needed for making mortar/concrete mix with 50 Kgs of Cement.HYPOSUPER SIZER is especially made for durable and high strength of concrete. It is based on blends of organic polymers and is of chloride free & non toxic. By its dispersing power it increases disintegration and hydration of cement particles very well, Which results in much more flowable and compact concrete with reduced water/cement ratio.Advantage High work ability with reduced water/cernent ratio. Compact, Homogenous and flowable concrete mix. Maintains high slump with lowest water bleeding. Can achieves high grade of concrete mix design. Easy de-shuttering with improved surface finishing. Water tightness of final concrete with low porosity. Very much suitable for precast and prestressed concrete products. Ideal for RCC of Beam, Column, Slabs, Tanks, Bridge, Dams and like other heavy duty concrete. Requirements 200 ml /bag of cement for medium duty concrete. 200 ml to 400 ml / bag of cement for high grade of concrete mix design. NOTE : Add pre-decided dose of HYPOSUPERSIZER with last bucket of water. High Strength Adhesive http://www.hypolchem.com/high-strength-adhesive.htm http://www.hypolchem.com/high-strength-adhesive.htm Mon, 05 Aug 2019 00:00:00 +0530 Features : Ready to use, only water to be added. High strength with improved adhesion. No Slump & Non Sagging Good workability & Better Coverage. Suitable for internal application of Vitrified & Ceramic tiles On wall & floor, any type of exterior flooring. Direction for Use Surface Preparation : The surface to be tiled must be firm and clean, free from dust, waxes, paint and other contamination. Mixing : Mix with clean water using 5-6 liters per 20 Kg. bag to a thick creamy consistency. Adjust mix to suit users preference. Mix sufficient to last 30-60 minutes. Allow to stand for 5-10 minutes and stir again before use. Application : Apply with a notched trowel. The final bed thickness must not be less than 2 mm for wall and 3 mm for floors, to accommodate movement. Spread about 1 meter at a time. Tiles must be set in place while the adhesive is still wet on the surface. Press tiles firmly on to the adhesive using a slight sliding motion. Coverage : Approx 50 -55 sq.ft/ Bag at 3 mm bed thickness Grouting : Grout after adhesive has set for 24 hours. Safety Precautions : Non-toxic, but contains cement which contains silica. Wear gloves and appropriate respirator. Shelf Life : 12 month when stored in normal dry condition. Insulation & Waterproofing Protective Coating http://www.hypolchem.com/insulation-waterproofing-protective-coating.htm http://www.hypolchem.com/insulation-waterproofing-protective-coating.htm Mon, 05 Aug 2019 00:00:00 +0530 Super Strength Adhesive http://www.hypolchem.com/super-strength-adhesive.htm http://www.hypolchem.com/super-strength-adhesive.htm Mon, 05 Aug 2019 00:00:00 +0530 Feature : Ready to use, only water to be added. High strength with improved adhesion. No Slump & Non Sagging Good workability & Better Coverage. Suitable for internal application of Vitrified & Ceramic tiles On wall & floor, any type of exterior flooring. Direction for Use Surface Preparation : The surface to be tiled must be firm and clean, free from dust, waxes, paint and other contamination. Mixing : Mix with clean water using 5-6 liters per 20 Kg. bag to a thick creamy consistency. Adjust mix to suit users preference. Mix sufficient to last 30-60 minutes. Allow to stand for 5-10 minutes and stir again before use. Application : Apply with a notched trowel. The final bed thickness must not be less than 2 mm for wall and 3 mm for floors, to accommodate movement. Spread about 1 meter at a time. Tiles must be set in place while the adhesive is still wet on the surface. Press tiles firmly on to the adhesive using a slight sliding motion. Safety Precautions : Non-toxic, but contains cement which contains silica. Wear gloves and appropriate respirator. Description SUMISET is a mining grade high molecular weight anionic type water soluable settling agent. Uses SUMISET is useful for clarification, thickening, Filtration and centrifugation in mineral benefication processes. It is also effective reagent for sedimentation of waste sludge in chemical, textile, municipal sewage, food & beverage industries. As a retention aid for fine fibers and mineral fillers in carft paper industries. Advantages Low dose level resultant lower cost for seperation. Faster settling leading to increased process output and capacity. Higher bottom fluid density and better compaction of sludge. improve the clarity of supernatant liquid which provides better quality and increased filter capacity. Non Corrosive and effective over wide pH range. Solution Preparation SUMISET are delivered in granular powder form and needed to prepare solution in water before use. Prepare a stock solution having concentration of 0.3 to 0.5% with potable clear water. For making of stock solution add water to the make-up tank until mixer / agitator blade covered with water. Dirperse the SUMISET powder in to the tank by means of vibrating feeder with continuous agitation, agitator RPM Should not more than 100. Continue agitation for about 60 to 80 minutes till there is no any swelled glassy lumps of SUMISET particle seen. Now transfer the above stock solution to the holding (Dispencing), tank and dilute it with clean portable water to get 0.1% Final Solution for application. It is advised that all prepared solution should be used within 2-3 days. How to Apply Use of positive displacement or gear pump is recommended for metering (Dosing) of SUMISET Solution. Add the SUMISET Solution across the process stream so as to get uniform reacting time. Avoid excessive turbulence after coagulation. Dosages SUMISET be applied in a small dosages ranging from 1 to 20 ppm in the form of 0.1% dilute solution depending on types of turbidity and suspended mineral particles. Calculation of ppm For example 1000 ml (1.0 Ltr.) turbid liquid if needs 2 ml of 0.1% SUMISET solution it is equivalent to 2 ppm. Tile Fixing Adhesive http://www.hypolchem.com/tile-fixing-adhesive.htm http://www.hypolchem.com/tile-fixing-adhesive.htm Mon, 05 Aug 2019 00:00:00 +0530 Feature : Ready to use, only water to be added. High strength with improved adhesion. No Slump & Non Sagging Good workability & Better Coverage. Suitable for internal application of Vitrified & Ceramic tiles On wall & floor, any type of exterior flooring. Direction for Use Surface Preparation : The surface to be tiled must be firm and clean, free from dust, waxes, paint and other contamination. Mixing : Mix with clean water using 5-6 liters per 20 Kg. bag to a thick creamy consistency. Adjust mix to suit users preference. Mix sufficient to last 30-60 minutes. Allow to stand for 5-10 minutes and stir again before use. Application : Apply with a notched trowel. The final bed thickness must not be less than 2 mm for wall and 3 mm for floors, to accommodate movement. Spread about 1 meter at a time. Tiles must be set in place while the adhesive is still wet on the surface. Press tiles firmly on to the adhesive using a slight sliding motion. Safety Precautions : Non-toxic, but contains cement which contains silica. Wear gloves and appropriate respirator.